Contents:
-All Points
-List Points
-Multi-Site Test
- Log into the Monitoring Portal.
https://portal.agmonitoring.com/stagesdealer/
- Enter the account number in the search bar and click the binoculars to search.
- Click on the xmit# to open the account.
- Click on the 'Device Test/Runaway' button.
- The hammer and wrench icon for a multi site test.
- Click 'All' to place all of the points on test.
- Click 'List' if you only need to put some of the points on test.
All Points:
Back to Top
- Click 'All' to place all points on test.
- Under 'Category' choose the duration.
- If you choose a duration (i.e. 1 hour test, 8 hour test, 24 hour test). the effective/expire date and time will auto-populate.
You do not need to pick a test type specific to the device. For example, even if the device is a 2-way you do not need to pick a 2-way test category. Simply pick the duration needed.
- If the desired duration is not listed, select 'Custom Test'.
- After selecting 'Custom Test' you'll need to select an effective/expire date and time.
- Click the checkmark to place the test.
List Points:
Back to Top
- To place only some of the points on test, click 'List'.
- Under 'Category' choose the duration.
- If you choose a duration (i.e. 1 hour test, 8 hour test, 24 hour test). the effective/expire date and time will auto-populate.
You do not need to pick a test type specific to the device. For example, even if the device is a 2-way you do not need to pick a 2-way test category. Simply pick the duration needed.
- If the desired duration is not listed, select 'Custom Test'.
- After selecting 'Custom Test' you'll need to select an effective/expire date and time.
- Click on 'Points Only'
- The window 'Test Points Multiple Select' will pop up.
- Click the 'Select All' icon to select all of the points.
- Select 'Clear All' icon to deselect all of the points.
- Check the boxes on the left to manually select points.
- Click the 'Ok' icon when finished.
- Then press the checkmark button on the 'Place on Test' page to start the test.
Multi-Site Test:
Back to Top
- Click the hammer and wrench icon.
- The 'Multi-Site On Test' window will pop up.
- Check the box next to the accounts that need to be placed on test.
- Under 'Category' select the duration of time. If you select a premade duration (i.e. 1 hour test, 8 hour test, 24 hour test), the effective/expire date and time will auto-populate.
- If you select 'Custom Test' you will need to manually enter the effective/expire date and time.